Gorgeous, hand crafted Stonebridge Grand Auditorium acoustic guitar. Model number G24LC-C (cutaway), this guitar features a high quality solid Alpine Spruce top and solid Cocobolo back and sides, with solid Koa custom sound hole ring, binding, and inlays. See below for full list of features and specs.
Sonically, this guitar has sparkling highs and a clear bass tone, a little brighter at the low end than rosewood. Crisp and clean sounding; this guitar has surprising projection and astounding sustain! Easy playing with nice note separation up and down the fretboard. Be sure to check out the video below.
Stonebridge Guitars are built by the Furch guitar company; the only difference between a Stonebridge and a Furch of the same model is the logo on the headstock and the inner label. This guitar matches or exceeds the sound and build quality of guitars costing far more. An incredible value, you will have a difficult time finding anyone who has played a Furch built guitar who has a bad word to say about them. Try one out for yourself!
TOP: Alpine Spruce BACK & SIDES: Cocobolo CUSTOM FEATURES: Hawaiian Koa with abalone sound hole rosette Hawaiian Koa body binding with black and white purfling Hawaiian Koa fingerboard and headstock binding FEATURES: Solid premium grade tone woods Two piece Honduran Mahogany neck Venetian Cutaway Ebony fretboard & bridge Ebony headstock onlay Ebony bridge pins with abalone dot inlay Hawaiian Koa binding with black and white purfling Hawaiian Koa with Abalone Sound Hole Rosette Tapered X-Bracing Two-Way Adjustable Truss Rod Clear Static Pickguard Paua Abalone / Hawaiian Koa Headstock Logo Inlay Paua Abalone / Hawaiian Koa Fretboard Inlay Schaller Ebony & Nickel Tuners (16:1 Ratio) Hand Rubbed Semi-Gloss Lacquer Finish/ Satin Finish Neck Crowned Top Headstock Elixir Ph-Br Nanoweb 012-53 Light to Medium Gauge Strings Recommended Limited Lifetime Warranty SPECIFICATIONS: Lower Bout: 15.67″ Upper Bout: 11.38″ Waist: 9.41″ Depth at End Pin: 4.57″ Depth at Neck Joint: 3.78″ Scale Length: 25.563″ Body Length: 20″ Overall Length: 41.06″ Nut Width: 45mm or 1.77″ Fingerboard Radius: 400mm or 15.748” String Spacing at Nut: 1.42” String Spacing at Bridge: 2.17” Setup for Light Gauge Strings Frets – 20 Frets – Nickel/Silver Frets – Width: 2.0mm (0.0787″) Frets – Height: 1.0mm (0.0394″) TUSQ Nut & Saddle EXTRAS INCLUDED Hiscox Hard Shell Case Truss Rod Wrench Quantity of two bridge pins and some replacement frets