Bryston 2B-LP Dual Channel Stereo Power Amplifier

Perfect working condition.  Item shown in photos is item you are getting.  I have used for mixing on Auratones and it is a perfect match.

BRYSTON 2B-LP

The Bryston 2B-LP amplifier is a compact, high quality 60 watt per channel, (8 ohms), stereo amplifier intended for use in home sound systems requiring a musically accurate, extremely reliable, no compromise power source.While the 2B-LP has for years been thought of as an exceptionally lucid and transparent amplifier for traditional two-channel stereo setups, it is now finding additional acceptance in such installations as multimedia surround-sound systems, and in the most ambitious music systems with multi-amplified speakers using electronic crossovers.Features include: Completely separate stereo channels, including dual power supplies, to prevent any interaction between left and right signals, for precise soundstaging and image quality. Green/red power/clipping lights to give immediate indication of any overload or fault condition. Rear-mounted ground lift switching to avoid potential ground loops and system hum. Gold plated five-way binding posts and gold plated RCA connectors to prevent any possibility of long term corrosion or connector distortion. Finally, higherpower monaural operation is as easy as the flick of a rear-mounted stereo/mono switch.Bryston exclusively uses only the finest components in our designs, such as 1% metal-film resistor, polystyrene capacitors and hand-matched transistors to reduce noise and distortion to an absolute minimum. All signal circuitry is fully discrete to avoid the compromises, phase shift and nonlinearities inherent in IC’s. Bryston applies techniques and employs custom materials in our everyday construction of electronic equipment which are more typically found in military and aerospace industries.If your requirements are sonic excellence, ultimate reliability, system flexibility and superb value, Bryston power amplifiers will surpass your every performance criterion.


SPECS:
Watts: 60 watts per channel, 8 ohms
100 watts per channel, 4 ohms
200 watts, bridged, 8 ohms
Harmonic Distortion: Less than 0.01% from 20Hz to 20kHz at 60 watts

IM Distortion: Less than 0.01% from 10 milliwatts to 60 watts
Noise: 100dB below full output

Crosstalk: Below noise 20Hz to 20kHz at 50 watts

Slewing Rate: less than 60 volts per microsecond

Power bandwidth: .5Hz to over 100kHz

Damping factor: Over 500 at 20 Hz, ref. 8 ohms

Input sensitivity and impedance: 0.75 volt in for full output 50k    40k - balanced 
   

FEATURES: Bridging switch Over 1600cm2 of heatsinking; over3200cm2 with chassis
Regulated power supplies to all voltagegain stages Each channel separated back to the linecord Dual-colour LED pilot lights for each channel,indicating green at normal levels, flashing red at clipping Will deliver full output to any phase angle at 4 ohms or higher
Gold-plated RCA jacks 
Balanced or unbalanced input


DIMENSIONS AND WEIGHT: 19 x 1.7 x 10 inches (48.25 x 4.44 x 25.4 cm) Weight: 18 lbs (8 kg)