AER Compact 60 -2 ,2011, Black High Quality Acoustic Amplifier, Very Good

This is an AER Compact 60 acoustic guitar amp, version 2.I am the original owner and bought it new in 2011.It is in very good to excellent condition.All functions work and the amp is cosmetically in excellent condition.Included is the factory gig bag in very good condition also.One zipper tab on the gig bag is missing.Otherwise the bag closes well with the second zipper, in good condition.
Also included is a portable tilt type of amp stand that is an accessory item made by AER for this amp.

This is an outstanding acoustic guitar amp, very compact and powerful for its size.Made in Germany so this will last many years.

The Amp has never needed any repairs and performs like it did on day one.

Please refer to my 100 per cent positive feedback here and on eBay.(gabe 9546 on Ebay).   

Manual will be included.

*** Please note-because of using a flash for the photos, the amp appears to be somewhat grey.It's actual color is a matte black....

Specs:

Input (channel 1) Stereo jack ¼" (6.35 mm) High impedance, unbalanced jack input for instruments (pick-ups) and line-level sources. high/low switch: –10 dB attenuator Impedance: 2.2 Meg Input (channel 2) Combo socket, XLR jack ¼" (6.35 mm) line mode: High impedance, unbalanced jack input for instruments (pick-ups) and line-level sources. Sensitivity: 38 mV Impedance: 1 Meg mic mode: XLR (balanced), stereo jack (balanced), or mono jack (unbalanced) input. Voice Filter 24 V-Phantom-Power through 6.8 kohms to XLR socket Clip indicator: Headroom 6 dB Return Return from external parallel effect loop Sensitivity: 430 mV Clip Headroom: 15 dB Attack Time: 4 ms Outputs (note 3) Phones Headphones output. When connected, internal speakers are muted. Stereo jack, ¼" (6.35 mm) Output power: 100 mW Caution: For stereo headphones with stereo jack plug only. Do not connect mono plugs. Tuner Tuner output. Mono jack, ¼" (6.35 mm) Output voltage: 310 mV Line out Line output after tone controls, with return and effects. Mono jack, ¼" (6.35 mm). Output Voltage: 1.3 V DI-out Line output after tone controls, with return and effects. Mono jack, ¼" (6.35 mm). Output Voltage: 1.3 V Send Send for parallel effect loop Mono jack, ¼" (6.35 mm) Output voltage: 1.3 V 6 Tone controls channel 1: ± 8 dB at 100 Hz Bass channel 2: ± 8 dB at 100 Hz channel 1: ± 6 dB at 800 Hz Middle Treble channel 1: ± 8 dB at 10 kHz channel 2: ± 11 dB at 10 kHz Effects Internal effect digital effect processor with 4 factory presets 1 – warm hall 2 – bright hall 3 – chorus with reverb 4 – flanger External effect Parallel effect loop (see send and return) Power Power amp 60 W at 4 ohms, discrete bipolar transistor design Analog signal Subsonic filter, low distortion RMS limiter processing Speaker system 8" (200 mm) twin cone speaker Mains power AC 230 V, 50-60 Hz, max. 120 W (other mains voltage available) Mains fuse slow 1 A for 230-240 V slow 2 A for 115 V slow 2 A for 100 V General Cabinet 15 mm (0.6") finnish birch plywood Finish Waterbased acrylic, choco spatter finish Dimensions 265 mm (10.4 ") high 330 mm (13 ") wide 235 mm (9.25 ") deep Weight 7,55 kg (16.65 lb